




Winner
Regions
Charity Classic
Keith
Fergus plays the V5 LX driver to win both the Cap Cana Championship and Regions
Charity Classic

More
Rigid For Higher Smash Factor

The
V5 LX was designed around one goal – to maximize the “smash factor” for
explosive ball speed off the face. Smash factor is the ratio of ball speed
to club head speed. Drivers deform at the face-frame junction during
impact. This deformation causes energy dissipation and thus a loss of ball
speed.
The
V5 LX is designed to transfer maximum energy to the ball by virtually
eliminating this deformation.
The
V5 LX crown is thicker towards the face than at the rear along three vertical
sections. This variable crown thickness minimizes deformation at impact.
And it increases the rigidity over a uniformly thick crown by 22%, making the
body incredibly solid and maximizing smash factor.
Workability
The
Alpha V5 LX empowers golfers to hit a fade or draw with relative ease. The
movable weights shift the horizontal center of gravity to give the club a draw
or fade bias. And the extra wide face amplifies the bias that occurs from
the shift in horizontal COG.
There
are 2 movable weight ports on the V5 LX - one at the toe and one at the heel.
Adding
more weight towards the toe moves the center of gravity rightwards (away from
the hosel). This causes a fade bias - the ball starts off left at impact
and comes back right due to a clockwise spin imparted on the ball from the
right-of-center COG. Adding more weight towards the heel moves the center
of gravity leftwards (towards the hosel). This causes a draw bias - the
ball starts off right at impact and comes back left due to the counter-clockwise
spin imparted on the ball from the left-of-center COG.
While
professional golfers can induce a draw or fade without changing weights, most
amateurs can pull off these difficult shots with a weight adjustment. In
either case, the V5 LX is especially conducive to working the ball due to the
particularly wide aspect ratio of the face. A wider face gives the golfer
a larger range on the X-axis to place the horizontal center of gravity.
"I
like the workability of this one (Alpha V5 LX Driver). I can draw the ball
pretty easily off the tee. I like the ball flight to get past doglegs, and
even trees" - Steve Thomas, Champions Tour Player
Smooth
as Satin
The
face of the V5 LX is coated with Ti-CN (Titanium Carbon Nitride), giving it a
distinct satin finish. While very pleasing to the eye, it also serves as
an instructional tool. The impact with the ball leaves an erasable
point-of-contact mark to provide immediate feedback on where contact was made.
MATERIAL
15-3-3-3 Titanium
PERFORMANCE
Maximum Smash Factor (ball speed)
PLAYER PROFILE
Mid to Low Handicappers
close
|
Lofts* |
8° | 9° | 10.5° | 12° |
|---|---|---|---|---|
| Volume | 460cc | 460cc | 460cc | 460cc |
| Face Angle | 0° | 0° | 0° | 0° |
| Lie | 59° | 59° | 59° | 59° |
| Weight | 200g | 200g | 200g | 200g |
| Face Height | 55mm | 55mm | 55mm | 55mm |
| Length | 45.5" | 45.5" | 45.5" | 45.5" |
| Swing Weight | D5 | D5 | D5 | D5 |
Technology Points
•
22% increased rigidness helps to maximize Smash Factor
• Setup with confidence with a deep face and compact profile
• Black satin TiCN-coated face leaves an erasable point-of-contact imprint
• Adjust your ball flight with customizable weight ports
• Wider distance from COG to hosel for workability and control
Headcover &
Starter Weight Kit
A
purchase of the V5 LX driver includes Alpha's patented Magnetic Headcover.
This clever design is a unique compliment to your new driver, and is an elegant
piece in and of itself. Also included is the V5 LX Starter Weight kit.
1 set of 3g weights and 1 set of 8g weights along with an allen wrench and
handy alpha pouch make customizing your driver's trajectory a snap!
Note:
The driver itself comes pre-installed with a set of 2g weight screws.
close