Skip to content

Aldila Rogue Black 130 M.S.I. Wood Shaft

Series and Flex
Backorder Alert! This item may take longer to ship. Please contact us for ETA.

WHAT YOU NEED TO KNOW

  • Advanced low torque graphite wood shaft
  • High strength modulus for consistent accuracy
  • Mid-High Launch, Mid Spin

    SPECIFICATIONS

    ITEM DESCRIPTION FLEX LENGTH(in) WEIGHT(g) TIP O.D.(in) TIP LENGTH(in) BUTT O.D.(in) TORQUE(degrees) KICK PT. TIP TYPE
    ROGUE® Black 130 M.S.I. 50 TR 46.0 56 0.335 3.0 0.604 5.2 MID PARALLEL
    ROGUE® Black 130 M.S.I. 50 TS 46.0 58 0.335 3.0 0.606 5.1 MID PARALLEL
    ROGUE® Black 130 M.S.I. 60 TR 46.0 61 0.335 3.0 0.614 4.6 MID PARALLEL
    ROGUE® Black 130 M.S.I. 60 TS 46.0 63 0.335 3.0 0.618 4.4 MID PARALLEL
    ROGUE® Black 130 M.S.I. 60 TX 46.0 65 0.335 3.0 0.657 4.0 MID PARALLEL
    ROGUE® Black 130 M.S.I. 70 TS 46.0 74 0.335 3.0 0.622 4.0 MID PARALLEL
    ROGUE® Black 130 M.S.I. 70 TX 46.0 77 0.335 3.0 0.663 3.2 MID PARALLEL
    ROGUE® Black 130 M.S.I. 80 TX 46.0 86 0.335 3.0 0.663 2.7 MID PARALLEL

     

    FULL DESCRIPTION

    The ALDILA® ROGUE® offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft. Building off the success of the ROGUE® BLACK 110 M.S.I. Limited Edition which featured 110 M.S.I. Graphitic Carbon Fiber, we have taken ROGUE® performance to another level by incorporating even stronger 130 M.S.I. Graphitic Carbon Fiber.

    The ROGUE® Black 130 M.S.I. is a mid-high launch, mid spin shaft with a reinforced tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber and a higher-balance point.

    DIALEAD® Pitch Fiber (Graphitic Carbon Fiber)

    DIALEAD® Pitch Fiber (Graphitic Carbon Fiber) is known for its outstanding strength and energy transfer properties - which helps minimize unwanted shaft deformation throughout the golf swing. While more costly and difficult to manufacture, the pitch fiber we are using is much stronger than traditional carbon fiber. All prepreg used in our shafts is developed and produced by Mitsubishi Chemical, or our trusted partners, giving us precise control over every step of the process.

    High Balance Point

    By using innovative materials and creating slightly thicker walls toward the butt-end of the shaft we raised the balance point of the shaft which creates the potential for lighter swing weights, increased head-speed and distance.

    NexGen Micro Laminate Technology® (MLT)

    ALDILA®’s NexGen Micro Laminate Technology® (MLT) utilizes ultra-thin layers of premium aerospace-grade materials. Shafts with MLT use up to twice as many prepreg plies as alternative shafts, producing a stable, solid laminate void of “dead zones”. This design revolution eliminates inconsistent shots caused by shaft variability, while enhancing feel.